8:55 AM

DIY Customer Shorts Overalls

Good morning loves!!!!!

While flipping through my inspirations photos, I came across these overall shorts that I saved well over a month ago from here

 
 
First things first.  I decided to draft the short for these overalls from my previous post DIY drafted shorts from an existing pair pictorial
 
 
I widened the seams 1inch in the crotch acrea and 1.5 everywhere else.  I also accounted for the waistband because the these shorts will not have a waistband BUT will have a 1inch higher waist than the original shorts.  I cut (4) pcs exact.
 
 
 
Next it was time to draft the overall.  I wanted the bottom portion of my overall to be 6 inches and curve out from there.  I also wanted my straps to be longer than my estimated lenth of 25" to account for any adjustments I needed to make, so I cut them 32 inches (I did this is 2 pieces)
 
As you can see below I pivetted the angle for my shape because these straps will over over my breast and did not want the portion right over my breast to gape out (this was my oen logic, not any specific technique).  I believe you may be able to achieve the same look with staiaght lines as well. 
 

 
My bib is 10 inches wide (desided width plus 1 inch).  Once I drafted my shape (above) I cut the bottom, and drafted side only.  I then folded the pattern in half to duplicate the shape on the other side.
 
 
 
Next its time to cut out the bib to shape.  I grabbed my curved ruler and drafted out the shape on one side. Again, I choose to but this curve in 7 inches above the bottom of my pattern.
 
 
When doing this, you want to curve your ruler to eliminate any sharp edges!!
 
 
Once drafted, I cut the pattern folded for even duplication.
 
 
Next its time to Sew!!!! 
 
I sewed the seams of all 4 pcs and inserted my side zipper as indicated in my shorts pictorial.
 
Thenext thing I did was put 4 5/8 inch box darts in the fron of the shorts.  (this is consistant with the shape of MY shorts and may differ with yours.
 
 
Next I put 2 standard darts in the back
 
 
After this was completed, I ddouble hemmed the bottom of my shorts and single hemmed the top... Done!
 
 


 
Next its time to insert the Bib.  I pinned the bid to the inside of the waist hem and sew'd along the hem line.
 

Done!
 
 
 
 
Now its time to draft the back bib (if that is what it is called lol).  I pretty much eyeballed this with 2.5 inch width by 9 inchs.
 

 
 
  I drafted the curve with my curved ruler and folder over th duplicate.
 
 

 
Now its time to pin and sew.  The bak bid is sewn exaclty like the front. Ensure you line up the middle of your bibs with your center seams!
 

 



And that is it.  I added 2 bottons the back bid and used my sewing machine to create 2 horizontal button holes.
 
 

 
 
 
 
 



 



 
 
 
 
 
 
 




View Post

1:14 PM

DIY Jeans Deconstruction for Pattern

Ok, so I took a long hard look in my closet for the one pair of jean I owned that I would not mind sacrificing for the sake of a pattern.  I wanted to create a unique pair of white jeans (my fav) that would fit me like a glove.  Anyone that knows me I live for a great pair of jeans and am a collector of sorts.  So here we go!!!



I cut the front, back, yoke and waist band off all 1 inch from the edge of the fabric.  The pockets I self drafted from another pair.

 

 
For construction of jeans please see my DIY floral pants pictorial.  All other steps are the same (some pics below).








View Post

1:03 PM

DIY Pleated Skirt (no pattern)

Ever have just enough fabric to literally "throw" something together?  I have neen looking at this blue fabric for a couple of weeks.  I had just over a yard left after making a pair of jeans for a friend and decided I wanted a simple and fast pleated skirt.  There is not much madness to making a skirt like that.  If you know how to put on a zipper, you are pretty much golden.
 
 
 
 
Step #1 I cut out 4 inches of the fabric along the length of the fabric and folded.
 
 
 
Step #2  I double hemmed what would be the bottom of the skirt,




Step #3 Using my pattern weights, I pleated my fabric and keeping in mind I needed the complete garment to be no less than 29 inches (my waist plus 1 inch).

 
Step #4 I slid my weights down and placed my waistband on top of my pleats and pinned.  Once pinning was complete, I removed the weights. 
 
 

 
Step #5 Sew your waist band on using a  standard 5/8 inch seam allowance.

 
Step#6 Sew your side seams together and insert your zipper

Step #7 You are DONE!!!!
 
I hope you guys like my quick skirt!  I think it was a perfect use of the extra fabric.
 

View Post

12:50 PM

DIY Summer Shorts (From an Existing Pair)

Good morning loves!!!

I have a ton of posts today to catch up after much needed spring cleaning and "me" time.  First up... My 3'fer summer shorts inspired by a pair of platic island sequin shorts. several years ago Here


 
I created a youtube video on the construction as well (below) and here

 
 
My yellow jacket is M6844 with a 3 inch peplum.  The Orange Jacket is M6902 without the peplum or collar, and finally the print jacket is M6902 view D.
 

 

 
 

 
 
Here are pictures of the process that I took in case I bombed the tutorial :)
 





 
Below is how I constructed the pocket and added the zipper



 
 
 
View Post

10:22 AM

DIY Floral Jeans M6756 Altered

Happy Friday everyone!!!
 
On last night I completed my very first pair of jeans.  I must say, I have a ton of respect for people that sew garments for a living.  Anyone who khows me knows I am pretty much a jeans fanatic.  I own in the neighborhood of 50 pairs and cater my diet to fitting into them (not always successful though).  Jeans are the hardest thing for me to donate but I try.
 
While I could have very well used M6610 to complete this garment, I could not find it to save my life! (I am 100% sure Ive purchased it in the past).
 
Instead, I used M6756 view A, drafted it into a straight leg pant and removed 2 inches from the front to take away the high waist. 
 
 
Have you ever took a closer look at your jeans?  For my inspiration, I used a pair of hudson jeans and I duplicated all of the seams.... (note: you may want to cut your pants one size larger to accomodate for those seams).

 
 
 
I purchased the fabric from Fabricmartfabrics.com on sale for $1 per yard (no longer available).  While the fabric was cotton, it was not denim.  It has the thickness of denim and it why I decided to make my first pair of jeans.  Now I feel confident to cut into my designer denim fabric :).
 
I hope you like them!
 
Muah

- J
 
 
 
 
View Post

7:39 AM

DIY Quick and Easy 5 Piece Pencil Skirt

Hello there!

Very quickly I wanted to post this skirt using my pencil skirt technique which you can fine an infinate sources for on youtube.  For this version, I simply reduced the sides of my front by 3 inches and my back by 1 inch.  Then I created the middle side piece 6 inches wide with a diagonal hem from the front to the back of the skirt.  The front of the skirt is 10 inches shorter than the back. 

My apologies on not have much more instructions than that. This was "thrown" together fairly quickly.

Muah!!!

 

 




View Post

7:33 AM

DIY Suit with Layered Sleeves

Hello Loves!

I worked on this suit for about 2 weeks.  Sometimes you have to walk away from a project and come back with fresh eyes.  This was definately the case with this suit.  I dont like creating blazers... it is no secret to anyone that knows me.  On top of that, I wanted to create this horizontal pleat that I am in love with and cannot wait to incorporate into a leather jacket at the end of the year.  With all that said... this one took me through the ringer.

My fabric is denim and I continue to purchase this same fabric over and over again (same as my origami skirt) as I continue to run into it on the red tag isle at Joanns.  The day they have a red tag sale I should probably just buy the rest of it!

I used McCalls Pattern M6902 View D for the Jacket and Simplicity Pattern 1696 for my pants.  1696 is an amazing fit pattern that I attempted for the very first time.  Since I will be wearing this to work, I wasnt disapointed in my fit not being so "amazing" HA!

For my sleeves I cut my sleeve patter and placed on top of my pattern,  THEN I began to fold and pin my pleats.  Once done, I cut my sleeve out and continued sewing both the jacket and pants according the pattern instructions... I will definately be attempting this again.  Next time I am thinking of reinforcing the pleats with stitches.

 



View Post
© Needles and Fashion. All rights reserved.
Blogger Template Made By pipdig